Equipment > Inertia Friction Welder Machine Specifications

Inertia Friction Welder Machine Specifications

Different combinations and modifications are possible. All machines can be equipped with automatic load and unload devices, flash removal, and quality control machine monitors. All weld speeds are variable from 0 to maximum.

ModelRPM (Max.) Variable
Max. Flywheel
lb/ft2kg-M2
Max. Weld Force
lbkN
Max. Tubular Weld Area
In2mm2
Version
40 45,000/60,000
0.015 0.0006
500 2.22
0.07 45.2
B, D, V
60 12,000/24,000
2.25 0.095
9,000 40.03
0.66 426
B, BX, D, V
90 12,000
5 0.21
13,000 57.82
1.0 645
B, BX, D, T, V
120 8,000
25 1.05
28,000 124.54
1.7 1,097
B, BX, D, T, V
150 8,000
50 2.11
50,000 222.4
2.6 1,678
B, BX, T, V
180 8,000
100 4.2
80,000 355.8
4.6 2,968
B, BX, T, V
220 6,000
600 25.3
130,000 578.2
6.5 4,194
B, BX, T, V
250 4,000
2,500 105.4
200,000 889.6
10 6,452
B, BX, T, V
300 3,000
5,000 211
250,000 1,112
12 7,742
B, BX, T, V
320 2,000
10,000 421
350,000 1,557
18 11,614
B, BX
400 2,000
25,000 1,054
600,000 2,669
30 19,356
B, BX
480 1,000
250,000 10,535
850,000 3,781
42 27,098
B, BX
750 1,000
500,000 21,070
1,500,000 6,672
75 48,390
B, BX
1000 1,000
500,000 21,070
2,000,000 8,896
130 83,876
B, BX
2000 500
1,000,000 42,140
4,500,000 20,016
225 145,170
B, BX

Note: Weld capacities are based on optimum welding parameters for low carbon steel ("bar to bar" & "tube to tube" geometry). Parameters may be varied to accommodate a broader range of sizes, heat treatment and materials. Tubular capacities are dependent upon diameter and wall thickness.